The Trimble Navigation R1 99133 is a device that we have had come into our shop several times for issues with the USB port. Most often, the Micro USB port is clearly damaged through visual inspection, with bent/broken pins and/or shielding for the port. In some cases, we have even seen the port completely broken free from the motherboard. Regardless of the damage, our skilled technicians are up to the challenge.
Read MoreDo you have an iPod Classic that was accidentally damaged during a repair attempt? If so, hope is not lost as our highly skilled technicians are here to lend you a helping hand. In this particular case, an iPod Classic was in the process of service when the plastic battery connector was broken from the main board of the device. When this connector had broken from the surface of the motherboard, there were a number of solder pads pulled from the circuit along with the traces that allow for electricity to flow to the proper locations of the device.
Read MoreAre you having issues with a USB port on an electronic device? Is your USB port physically damaged or otherwise unresponsive? If so, contact us at www.microsolderingrepairs.com to send in your device for service. This is certainly a service that our trained technicians are more than capable of taking care of, and this is demonstrated through the repair of this Zebra ZD620 Printer PCB USB port.
Read MoreAre you experiencing issues with your Wilson Electronics signal booster? Is functionality intermittent or possibly gone altogether? If so, it is possible that the antenna SMB connection on the main board of your device is faulty and needs repair.
Read MoreAre you having issues charging your Samsung Galaxy J727 when plugging in the device? Does it seem to be physically difficult to plug in the cable to your device? If the answer to these questions are yes, then send us your Samsung Galaxy today so that our skilled technicians can evaluate the damage and repair the micro USB charging port!
Read MoreThe Apple iPhone 11 utilizes an LCD panel in its design, which means that a high voltage backlight circuit is an integral part of the design to make image on the display visible. Damage to this circuit most often occurs during a screen replacement in which proper precautions are not
taken, particularly if the battery is left plugged in when the screen is removed or connected to the logic board of the device. There is a chance that if the battery is left plugged in, a resistor on the logic board will be damaged, causing the backlight circuit to malfunction.
Here at Micro Soldering Repairs we have serviced thousands of devices over 5 years and have found the best soldering equipment for all budgets. On this page you will find different options for your next soldering setup.
Read MoreHaving ear speaker sound problems on your iPhone model X/XS/XR/XS Max, have our trained technicians take your device in to perform a ear speaker replacement soldering service. Contact us today!
As part of the iPhone X series and up Face ID biometrics now locks the front facing hardware to the motherboard which limits the options of replacement parts and repairs. For any replacements on the front ear speaker flex cable this would result in a loss of the Face ID function feature.
Something as simple as the ear speaker being damaged from water or technician damage would typically render the Face ID to fail if the whole flex cable assembly was replaced.
Read MoreIs your Nintendo Switch not taking a charge or connecting to your computer the way it should? Sounds like you might be in need of our Nintendo Switch charge port repair service.
You no longer need to throw away your broken switch console unit after the port/docking connector has been damaged. Fixing this port is well worth it and much cheaper than buying a new one. Contact us today to get yours repaired.
Read MoreInstalling a screen into your Motorola device and broken the locking tab or flexible printed circuit connector?
This is a common issue we see with DIY repairs when the screen cable is not seated properly and then the locking tab is flipped down. In order to fix this it’s typically required to replace the whole connector. We routinely repair this on many different motherboards.
Read MoreInstalled your cpu and damaged some pins? Did you drop your really expensive AMD Ryzen cpu and break the pins? Don't worry we can fix that at microsolderingrepairs contact us today.
Read MoreIf you have gotten the DIY urge and chosen to replace your cracked screen, or even remove a perfectly functional screen just to replace the battery on a pixel 1 or pixel 2 device you should know of this common mistake that many DIY-ers cause.
Read MoreWhen an iPhone 8 no longer charges, it can be the fault of many things. Typically it is the fault of the charging port, but when this is replaced and issues still exist then it may be time to look at the board.
If all the “external” parts have been replaced and tested (charging port/battery) then the fault can be related to what used to be called the Tristar, which has now been updated and renamed to the Hydra IC 1612A1 (U6300)
Read MoreIn the process of trying to connect, or even a sloppy disconnection, the display cables the VCC line shorts to GND and the sudden surge of current blows the small filter at the left end of the right FPC connector. This filter is directly related to touch
Read MoreIf the pins are bent, the HDMI is loose or a white light with no video, then the HDMI Port Repair needs to be repaired. Please make sure that the issue is the HDMI port and not the cable. Call us first if you have any questions/concerns.
Read MoreThere can be several problems that lead to the dreaded HDMI port failure. Among these are the port itself (99% of the time it's the port itself...they are made poorly and also soldered poorly out of the box), HDMI filters located near the HDMI port, the Panasonic IC chip also located near the HDMI port (these all work together to give you a picture on you television screen) and/or faulty board wiring.
Read MoreWe've discovered a "signature fault" in the iPhone 7 series which results in no audio meaning no sound from the ear speakers, loud speakers or microphones. Occasionally this also triggers boot-loops, which is when the phone tries to turn on a fails the hardware check which causes the phone to reboot for an extended period of time.
Read MoreA charger port is arguably the most used part of a mobile device. This often invites dirt, lint and damage from many repeated connections.
The USB-C interface allows for a more rugged and faster throughput, but is still susceptible to failure, damage and replacement.
Read More
![AMD Ryzen CPU Pin Repair Service [Bent/Broken/Missing Pins]](https://images.squarespace-cdn.com/content/v1/57f85b9e03596eb277b5eec3/1621705969018-TYG69T94OPHL79U3R80S/20210522_130132.jpg)
